Advan Logo Sticker Stylish Design

Advan Logo Sticker Stylish Design

• Materials Premium vinyl base topped with a 3D domed resin coating
• Diameter 20–120 mm (contact us for custom sizes)
• Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

The RS line's ten-spoke pattern is one of the most copied wheel designs in the aftermarket, but nothing matches the rigidity of the original Advan casting. These 3D domed wheel center cap emblems bring that same commitment to quality down to the smallest detail on your wheels. Each emblem is manufactured by printing the Advan logo in full color at high resolution onto premium automotive-grade vinyl, using solvent-based inks specifically chosen for their long-term outdoor durability and color retention. Over that printed surface, a thick, controlled pour of UV-stabilized polyurethane resin is applied and allowed to self-level into a perfectly smooth, bubble-free dome. The cured dome creates a glass-like surface with genuine three-dimensional depth that makes the logo appear to float beneath a clear lens. That resin layer does far more than look good — it resists scratches from stone chips and road grit, repels water, brake dust, and road salt, blocks ultraviolet radiation to prevent color fading, and remains flexible enough to survive thermal cycling from freezing winters to hot summer asphalt without cracking, peeling, yellowing, or lifting at the edges. The waterproof seal ensures no moisture can reach the printed layer underneath, keeping the emblem looking factory-fresh for years of daily driving and outdoor exposure. Installation is a simple peel-and-stick process that requires no special tools or skills. The factory-applied pressure-sensitive adhesive bonds securely to any clean, flat cap surface — metal, plastic, or coated. Hold for thirty seconds and the installation is complete; full bond strength develops within twenty-four hours and holds firm through rain, road salt, car washes, and temperature extremes. Choose from standard diameters between 20 mm and 120 mm, or contact us for a custom size to match your specific Advan cap recess. Each order includes one emblem.

How to Install (3 Easy Steps)

• PREP Clean the area thoroughly
• PEEL Remove the paper backing from the sticker
• STICK Carefully position the sticker and press firmly for at least 30 seconds

Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.