Impossible Stickers
0
0
Prev Product
Next Product
BMW M Power Emblem Epoxy Self-Adhesive Branded Edition
BMW M Power Emblem Epoxy Self-Adhesive Branded Edition
BMW M Power Emblem Epoxy Self-Adhesive Branded Edition
BMW M Power Emblem Epoxy Self-Adhesive Branded Edition

BMW M Power Emblem Epoxy Self-Adhesive Branded Edition

3.30
Availability:In Stock
SKU:4245

BMW M Power Emblem Epoxy Self-Adhesive Branded Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • By 1988 — just sixteen years after its founding — BMW Motorsport GmbH had grown from thirty-five employees to four hundred, and the M division had delivered an unbroken string of icons: the 3.0 CSL, the M1, the M635CSi, the E30 M3, and the E28 M5. In 1993 the company was officially renamed BMW M GmbH, reflecting the reality that the division had expanded far beyond its original motorsport brief into a full performance brand that touched everything from suspension tuning to interior trim. Today BMW M produces more models and variants than at any other point in its history. These 3D domed wheel center cap emblems celebrate that five-decade M heritage. A tough vinyl base captures the BMW M Power badge in vivid, factory-accurate colour, and a precision-applied coat of clear resin forms a raised dome with genuine three-dimensional depth and a polished, high-gloss surface. The emblem sits naturally on the center cap, adding a sculpted quality that flat badges cannot achieve. Materials are engineered for life at road level. Scratch-resistant resin absorbs impacts from flying stones and brake dust. Complete waterproofing blocks rain, snow, road spray, and car wash pressure. UV-resistant formulation prevents fading across years of outdoor exposure. Tear-resistant edges hold the bond through daily driving and temperature shifts. Clean the cap, peel the self-adhesive backing, center the emblem, press firmly for thirty seconds. Sizes from 20 mm to 120 mm. Custom sizes available.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

BMW M Power Emblem Epoxy Self-Adhesive Branded Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • By 1988 — just sixteen years after its founding — BMW Motorsport GmbH had grown from thirty-five employees to four hundred, and the M division had delivered an unbroken string of icons: the 3.0 CSL, the M1, the M635CSi, the E30 M3, and the E28 M5. In 1993 the company was officially renamed BMW M GmbH, reflecting the reality that the division had expanded far beyond its original motorsport brief into a full performance brand that touched everything from suspension tuning to interior trim. Today BMW M produces more models and variants than at any other point in its history. These 3D domed wheel center cap emblems celebrate that five-decade M heritage. A tough vinyl base captures the BMW M Power badge in vivid, factory-accurate colour, and a precision-applied coat of clear resin forms a raised dome with genuine three-dimensional depth and a polished, high-gloss surface. The emblem sits naturally on the center cap, adding a sculpted quality that flat badges cannot achieve. Materials are engineered for life at road level. Scratch-resistant resin absorbs impacts from flying stones and brake dust. Complete waterproofing blocks rain, snow, road spray, and car wash pressure. UV-resistant formulation prevents fading across years of outdoor exposure. Tear-resistant edges hold the bond through daily driving and temperature shifts. Clean the cap, peel the self-adhesive backing, center the emblem, press firmly for thirty seconds. Sizes from 20 mm to 120 mm. Custom sizes available.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.