Impossible Stickers
0
0
Prev Product
Next Product
BMW M Power Wheel Emblem Self-Adhesive Branded Edition
BMW M Power Wheel Emblem Self-Adhesive Branded Edition
BMW M Power Wheel Emblem Self-Adhesive Branded Edition
BMW M Power Wheel Emblem Self-Adhesive Branded Edition

BMW M Power Wheel Emblem Self-Adhesive Branded Edition

3.30
Availability:In Stock
SKU:4234

BMW M Power Wheel Emblem Self-Adhesive Branded Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • BMW Motorsport GmbH was founded in May 1972 with just thirty-five employees and one clear objective — to build race-winning engines. What started as a small workshop dedicated to competition powertrains grew into the global performance division known today as BMW M GmbH, responsible for every M-badged vehicle that rolls out of Munich. The M stands for Motorsport, and more than fifty years later, that original DNA still defines every car the division produces. These 3D domed wheel center cap emblems carry that founding motorsport spirit onto your wheels. A premium vinyl base reproduces the BMW M Power badge in vivid, factory-accurate color, and a thick coat of crystal-clear resin cures over it to form a raised dome with real three-dimensional depth and a polished, high-gloss finish. The result is a sculpted emblem that catches light and looks factory-fitted on any center cap. Protection is serious. Scratch-resistant resin handles road grit, gravel spray, and brake dust without showing marks. Full waterproofing blocks rain, puddles, standing water, and pressure-washer spray. UV-filtering properties built into the resin prevent colour fading through years of outdoor exposure. Tear-resistant edges hold firm under highway speeds and temperature swings. Fitting takes seconds — clean the cap surface, peel the self-adhesive backing, center the emblem, and press firmly for thirty seconds. Diameters from 20 mm to 120 mm. Custom sizes available on request.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

BMW M Power Wheel Emblem Self-Adhesive Branded Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • BMW Motorsport GmbH was founded in May 1972 with just thirty-five employees and one clear objective — to build race-winning engines. What started as a small workshop dedicated to competition powertrains grew into the global performance division known today as BMW M GmbH, responsible for every M-badged vehicle that rolls out of Munich. The M stands for Motorsport, and more than fifty years later, that original DNA still defines every car the division produces. These 3D domed wheel center cap emblems carry that founding motorsport spirit onto your wheels. A premium vinyl base reproduces the BMW M Power badge in vivid, factory-accurate color, and a thick coat of crystal-clear resin cures over it to form a raised dome with real three-dimensional depth and a polished, high-gloss finish. The result is a sculpted emblem that catches light and looks factory-fitted on any center cap. Protection is serious. Scratch-resistant resin handles road grit, gravel spray, and brake dust without showing marks. Full waterproofing blocks rain, puddles, standing water, and pressure-washer spray. UV-filtering properties built into the resin prevent colour fading through years of outdoor exposure. Tear-resistant edges hold firm under highway speeds and temperature swings. Fitting takes seconds — clean the cap surface, peel the self-adhesive backing, center the emblem, and press firmly for thirty seconds. Diameters from 20 mm to 120 mm. Custom sizes available on request.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.