Impossible Stickers
0
0
Prev Product
Next Product
BMW M5 Wheel Emblem Self-Adhesive Limited Edition
BMW M5 Wheel Emblem Self-Adhesive Limited Edition
BMW M5 Wheel Emblem Self-Adhesive Limited Edition
BMW M5 Wheel Emblem Self-Adhesive Limited Edition

BMW M5 Wheel Emblem Self-Adhesive Limited Edition

3.30
Availability:In Stock
SKU:4246

BMW M5 Wheel Emblem Self-Adhesive Limited Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The original E28 BMW M5, introduced in 1984 and debuted at the Amsterdam Motor Show in 1985, was entirely hand-built by BMW Motorsport technicians and became the fastest production sedan in the world at the time of its launch. Powered by a modified 3.5-litre inline-six engine descended from the legendary M1 supercar, the E28 M5 delivered 286 horsepower through a chassis that looked virtually identical to a standard 5 Series — the ultimate wolf in sheep's clothing. Only 2,241 units were ever produced, making the E28 M5 one of the rarest regular-production BMW Motorsport cars in existence. These 3D domed wheel center cap emblems carry that E28 M5 hand-built prestige. A premium vinyl base reproduces the BMW M5 badge in vivid, factory-accurate colour, and a thick coat of crystal-clear resin cures into a raised dome with real three-dimensional depth and a polished, high-gloss finish. The emblem catches light and looks factory-fitted on any center cap. Protection is serious. Scratch-resistant resin handles road grit, gravel spray, and brake dust without showing marks. Full waterproofing blocks rain, puddles, standing water, and pressure-washer spray. UV-filtering properties prevent colour fading through years of outdoor exposure. Tear-resistant edges hold firm under highway speeds and temperature swings. Fitting takes seconds — clean the cap, peel the self-adhesive backing, center the emblem, press firmly for thirty seconds. Diameters from 20 mm to 120 mm. Custom sizes available on request.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

BMW M5 Wheel Emblem Self-Adhesive Limited Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The original E28 BMW M5, introduced in 1984 and debuted at the Amsterdam Motor Show in 1985, was entirely hand-built by BMW Motorsport technicians and became the fastest production sedan in the world at the time of its launch. Powered by a modified 3.5-litre inline-six engine descended from the legendary M1 supercar, the E28 M5 delivered 286 horsepower through a chassis that looked virtually identical to a standard 5 Series — the ultimate wolf in sheep's clothing. Only 2,241 units were ever produced, making the E28 M5 one of the rarest regular-production BMW Motorsport cars in existence. These 3D domed wheel center cap emblems carry that E28 M5 hand-built prestige. A premium vinyl base reproduces the BMW M5 badge in vivid, factory-accurate colour, and a thick coat of crystal-clear resin cures into a raised dome with real three-dimensional depth and a polished, high-gloss finish. The emblem catches light and looks factory-fitted on any center cap. Protection is serious. Scratch-resistant resin handles road grit, gravel spray, and brake dust without showing marks. Full waterproofing blocks rain, puddles, standing water, and pressure-washer spray. UV-filtering properties prevent colour fading through years of outdoor exposure. Tear-resistant edges hold firm under highway speeds and temperature swings. Fitting takes seconds — clean the cap, peel the self-adhesive backing, center the emblem, press firmly for thirty seconds. Diameters from 20 mm to 120 mm. Custom sizes available on request.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.