Borbet Silicone Emblem Self-Adhesive Premium Edition

Borbet Silicone Emblem Self-Adhesive Premium Edition

• Materials Premium vinyl base topped with a 3D domed resin coating
• Diameter 20–120 mm (contact us for custom sizes)
• Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

The Type A's compatibility with the BMW E30's 4x100 bolt pattern made it one of the defining wheels of the E30 scene — a partnership between car and wheel that has become a cultural artifact in its own right. These 3D domed wheel center cap emblems bring that same German manufacturing quality down to the finest detail on your wheels. Each emblem is manufactured by printing the Borbet logo in full color at high resolution onto premium automotive-grade vinyl, using solvent-based inks specifically chosen for their long-term outdoor durability and resistance to fading. Over that printed surface, a thick, controlled pour of UV-stabilized polyurethane resin is applied and allowed to self-level into a perfectly smooth, bubble-free dome. The cured dome creates a glass-like surface with genuine three-dimensional depth that makes the logo appear to float beneath a clear lens. That resin layer does far more than look good — it resists scratches from stone chips and road grit, repels water, brake dust, and road salt, blocks ultraviolet radiation to prevent color fading, and remains flexible enough to survive thermal cycling from freezing winters to hot summer asphalt without cracking, peeling, yellowing, or lifting at the edges. The waterproof seal ensures no moisture can reach the printed layer underneath, keeping the emblem looking factory-fresh for years of daily driving and outdoor exposure. Each emblem comes with a factory-applied pressure-sensitive adhesive protected by a peel-away paper liner. Clean the cap surface, remove the liner, press the emblem into place for thirty seconds, and the installation is complete — no tools, no heat, no mess. The acrylic bond is rated for permanent outdoor use on metals, plastics, and painted surfaces, holding firm through car washes, temperature cycling, and prolonged UV exposure. Sizes are available from 20 mm all the way to 120 mm, and custom sizing is offered for non-standard configurations. Price covers one emblem.

How to Install (3 Easy Steps)

• PREP Clean the area thoroughly
• PEEL Remove the paper backing from the sticker
• STICK Carefully position the sticker and press firmly for at least 30 seconds

Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.