Borbet Silicone Sticker Self-Adhesive High Quality

Borbet Silicone Sticker Self-Adhesive High Quality

• Materials Premium vinyl base topped with a 3D domed resin coating
• Diameter 20–120 mm (contact us for custom sizes)
• Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

The company's Austrian production site adds manufacturing capacity and logistical flexibility, allowing Borbet to serve Central European markets with shorter lead times. These 3D domed wheel center cap emblems bring that same German manufacturing quality down to the finest detail on your wheels. Each emblem is manufactured by printing the Borbet logo in full color at high resolution onto premium automotive-grade vinyl, using solvent-based inks specifically chosen for their long-term outdoor durability and resistance to fading. Over that printed surface, a thick, controlled pour of UV-stabilized polyurethane resin is applied and allowed to self-level into a perfectly smooth, bubble-free dome. The cured dome creates a glass-like surface with genuine three-dimensional depth that makes the logo appear to float beneath a clear lens. That resin layer does far more than look good — it resists scratches from stone chips and road grit, repels water, brake dust, and road salt, blocks ultraviolet radiation to prevent color fading, and remains flexible enough to survive thermal cycling from freezing winters to hot summer asphalt without cracking, peeling, yellowing, or lifting at the edges. The waterproof seal ensures no moisture can reach the printed layer underneath, keeping the emblem looking factory-fresh for years of daily driving and outdoor exposure. The adhesive layer is a proven acrylic compound factory-applied to the underside of each emblem and protected by a removable paper backing. Remove the liner, set the emblem on a clean cap surface, and hold firm pressure for thirty seconds. The bond reaches full strength within a day and withstands rain, road salt, UV exposure, high-speed airflow, and pressure-washing without any sign of degradation. Available in all standard diameters from 20 mm to 120 mm; custom dimensions are produced on request for non-standard caps. Price is per single emblem.

How to Install (3 Easy Steps)

• PREP Clean the area thoroughly
• PEEL Remove the paper backing from the sticker
• STICK Carefully position the sticker and press firmly for at least 30 seconds

Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.