Impossible Stickers
0
0
Prev Product
Next Product
Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition
Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition
Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition
Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition

Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition

3.30
Availability:In Stock
SKU:3720

Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Corvette's 350 cubic inch small-block V8 powered the Corvette through many of its most important years, from the late 1960s through the mid-1990s. While the 350 began its Corvette career producing 300 horsepower in the high-performance L46 configuration, emissions regulations progressively reduced output during the 1970s before technology improvements restored performance in the 1980s and 1990s. The 350's adaptability, reliability, and massive aftermarket support ensured the Corvette's survival through the most challenging era in American performance car history, and the engine earned a reputation of bulletproof durability that served the Corvette extraordinarily well. These 3D domed wheel center cap emblems honour that 350 small-block endurance. A premium vinyl base reproduces the Chevrolet Corvette emblem in crisp, factory-grade color, and a thick layer of crystal-clear resin cures into a raised dome with genuine three-dimensional depth and a polished, high-gloss finish. Durability is comprehensive. Scratch-resistant resin handles road grit, gravel, and brake dust. Full waterproofing blocks rain, standing water, and pressure-washer spray. UV protection preserves vivid colors through years of outdoor exposure, and tear-resistant edges maintain permanent adhesion. Fitting is simple — clean the cap, peel the adhesive backing, center the emblem, and press firmly for thirty seconds. Sizes from 20 mm to 120 mm. Custom sizes are available.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Chevrolet Corvette Sticker Epoxy 3D Gel Limited Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Corvette's 350 cubic inch small-block V8 powered the Corvette through many of its most important years, from the late 1960s through the mid-1990s. While the 350 began its Corvette career producing 300 horsepower in the high-performance L46 configuration, emissions regulations progressively reduced output during the 1970s before technology improvements restored performance in the 1980s and 1990s. The 350's adaptability, reliability, and massive aftermarket support ensured the Corvette's survival through the most challenging era in American performance car history, and the engine earned a reputation of bulletproof durability that served the Corvette extraordinarily well. These 3D domed wheel center cap emblems honour that 350 small-block endurance. A premium vinyl base reproduces the Chevrolet Corvette emblem in crisp, factory-grade color, and a thick layer of crystal-clear resin cures into a raised dome with genuine three-dimensional depth and a polished, high-gloss finish. Durability is comprehensive. Scratch-resistant resin handles road grit, gravel, and brake dust. Full waterproofing blocks rain, standing water, and pressure-washer spray. UV protection preserves vivid colors through years of outdoor exposure, and tear-resistant edges maintain permanent adhesion. Fitting is simple — clean the cap, peel the adhesive backing, center the emblem, and press firmly for thirty seconds. Sizes from 20 mm to 120 mm. Custom sizes are available.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.