Chrysler Crossfire Emblem Epoxy Self-Adhesive Stylish Design

Chrysler Crossfire Emblem Epoxy Self-Adhesive Stylish Design

• Materials Premium vinyl base topped with a 3D domed resin coating
• Diameter 20–120 mm (contact us for custom sizes)
• Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

From every angle, the Chrysler Crossfire is a car that demands attention — and the center cap emblem is the final detail that ties those distinctive wheels back to the badge on the car that wears them. These 3D domed wheel center cap emblems bring that same distinctive Crossfire character down to the finest detail on your wheels. Each emblem is manufactured by printing the Chrysler Crossfire logo in full color at high resolution onto premium automotive-grade vinyl, using solvent-based inks specifically chosen for their long-term outdoor durability and resistance to fading. Over that printed surface, a thick, controlled pour of UV-stabilized polyurethane resin is applied and allowed to self-level into a perfectly smooth, bubble-free dome. The cured dome creates a glass-like surface with genuine three-dimensional depth that makes the logo appear to float beneath a clear lens. That resin layer does far more than look good — it resists scratches from stone chips and road grit, repels water, brake dust, and road salt, blocks ultraviolet radiation to prevent color fading, and remains flexible enough to survive thermal cycling from freezing winters to hot summer asphalt without cracking, peeling, yellowing, or lifting at the edges. The waterproof seal ensures no moisture can reach the printed layer underneath, keeping the emblem looking factory-fresh for years of daily driving and outdoor exposure. Fitting one takes thirty seconds flat. Wipe the cap clean with a lint-free cloth, peel the acrylic adhesive backing, drop the emblem into place, and push down firmly with your thumb. The bond grabs immediately and reaches full cure strength in twenty-four hours, holding strong through pressure washes, seasonal temperature swings, highway vibration, and everyday road grime. Stock sizes run from 20 mm to 120 mm in diameter, and we accept custom size requests for atypical or hard-to-find Crossfire cap designs. One emblem included per order.

How to Install (3 Easy Steps)

• PREP Clean the area thoroughly
• PEEL Remove the paper backing from the sticker
• STICK Carefully position the sticker and press firmly for at least 30 seconds

Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.