Daihatsu Logo Silicone Badge High Quality

Daihatsu Logo Silicone Badge High Quality

• Materials Premium vinyl base topped with a 3D domed resin coating
• Diameter 20–120 mm (contact us for custom sizes)
• Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

Daihatsu's reliability reputation among European owners is one of the reasons the brand maintains a loyal following years after withdrawing from the market — many Charades and Cuores remain in daily use with minimal maintenance needs. These 3D domed wheel center cap emblems bring that same Japanese engineering precision down to the finest detail on your wheels. Each emblem is manufactured by printing the Daihatsu logo in full color at high resolution onto premium automotive-grade vinyl, using solvent-based inks specifically chosen for their long-term outdoor durability and resistance to fading. Over that printed surface, a thick, controlled pour of UV-stabilized polyurethane resin is applied and allowed to self-level into a perfectly smooth, bubble-free dome. The cured dome creates a glass-like surface with genuine three-dimensional depth that makes the logo appear to float beneath a clear lens. That resin layer does far more than look good — it resists scratches from stone chips and road grit, repels water, brake dust, and road salt, blocks ultraviolet radiation to prevent color fading, and remains flexible enough to survive thermal cycling from freezing winters to hot summer asphalt without cracking, peeling, yellowing, or lifting at the edges. The waterproof seal ensures no moisture can reach the printed layer underneath, keeping the emblem looking factory-fresh for years of daily driving and outdoor exposure. The adhesive backing is a pressure-sensitive acrylic film with a peel-away paper liner. Clean the cap surface with isopropyl alcohol, remove the liner, center the emblem, and press firmly for thirty seconds — no tools, no drilling, no heat gun required. The industrial-grade bond holds through highway speeds, automatic car washes, pressure washers, and seasonal temperature swings without any edge lift. Available in diameters from 20 mm through 120 mm, with custom sizes manufactured on request to match any cap recess. Price listed is for one emblem.

How to Install (3 Easy Steps)

• PREP Clean the area thoroughly
• PEEL Remove the paper backing from the sticker
• STICK Carefully position the sticker and press firmly for at least 30 seconds

Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.