Impossible Stickers
0
0
Prev Product
Next Product
Fisker Domed Sticker Sleek Style
Fisker Domed Sticker Sleek Style
Fisker Domed Sticker Sleek Style
Fisker Domed Sticker Sleek Style

Fisker Domed Sticker Sleek Style

3.30
Availability:In Stock
SKU:7331

Fisker Domed Sticker Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Fisker Karma, launched in 2011, was one of the world's first luxury plug-in hybrid electric vehicles — a four-door grand tourer with a solar-panel roof, a 2.0-litre turbocharged range-extender engine, and a striking low-slung silhouette that turned heads in every parking lot it entered. The Karma proved that an electric powertrain could live inside a body designed to compete with Maserati and Porsche on pure visual impact. These 3D domed wheel center cap emblems carry the Fisker badge with the elegance the brand deserves. The construction starts with a high-resolution digital print of the logo on automotive-grade vinyl, reproducing the emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Diameters from 20 mm to 120 mm are in stock, fitting caps across the full Fisker lineup including a Fisker Ocean One. Custom sizes are just a message away for anything non-standard.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Fisker Domed Sticker Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Fisker Karma, launched in 2011, was one of the world's first luxury plug-in hybrid electric vehicles — a four-door grand tourer with a solar-panel roof, a 2.0-litre turbocharged range-extender engine, and a striking low-slung silhouette that turned heads in every parking lot it entered. The Karma proved that an electric powertrain could live inside a body designed to compete with Maserati and Porsche on pure visual impact. These 3D domed wheel center cap emblems carry the Fisker badge with the elegance the brand deserves. The construction starts with a high-resolution digital print of the logo on automotive-grade vinyl, reproducing the emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Diameters from 20 mm to 120 mm are in stock, fitting caps across the full Fisker lineup including a Fisker Ocean One. Custom sizes are just a message away for anything non-standard.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.