Impossible Stickers
0
0
Prev Product
Next Product
Infiniti Silicone Emblem Sleek Style
Infiniti Silicone Emblem Sleek Style
Infiniti Silicone Emblem Sleek Style
Infiniti Silicone Emblem Sleek Style

Infiniti Silicone Emblem Sleek Style

3.30
Availability:In Stock
SKU:7400

Infiniti Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Infiniti logo — a stylized road stretching toward a distant horizon, often interpreted as an abstract representation of Mount Fuji — encapsulates the brand's philosophy of endless possibility. That emblem has appeared on everything from the flagship Q45 sedan to the latest QX80 full-size SUV, and its presence on a center cap signals a vehicle engineered by a manufacturer that has spent over three decades refining the balance between luxury comfort and driver engagement. These 3D domed wheel center cap emblems honor that luxury heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every Infiniti wheel cap from a Q60 to the latest flagship models. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Infiniti Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Infiniti logo — a stylized road stretching toward a distant horizon, often interpreted as an abstract representation of Mount Fuji — encapsulates the brand's philosophy of endless possibility. That emblem has appeared on everything from the flagship Q45 sedan to the latest QX80 full-size SUV, and its presence on a center cap signals a vehicle engineered by a manufacturer that has spent over three decades refining the balance between luxury comfort and driver engagement. These 3D domed wheel center cap emblems honor that luxury heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every Infiniti wheel cap from a Q60 to the latest flagship models. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.