Impossible Stickers
0
0
Prev Product
Next Product
KIA GT Line Emblem Center Hup Cap Sleek Style
KIA GT Line Emblem Center Hup Cap Sleek Style
KIA GT Line Emblem Center Hup Cap Sleek Style
KIA GT Line Emblem Center Hup Cap Sleek Style

KIA GT Line Emblem Center Hup Cap Sleek Style

3.30
Availability:In Stock
SKU:7516

KIA GT Line Emblem Center Hup Cap Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Kia's GT Line philosophy draws directly from the design language established by the Stinger — the rear-wheel-drive gran turismo that proved Kia could build a car to challenge BMW and Audi on driving dynamics and visual presence. The tiger-nose grille, sculpted bodywork, and athletic proportions that defined the Stinger have been distilled into the GT Line aesthetic applied across the range, ensuring that even a compact hatchback or a family crossover carries a visual connection to Kia's most celebrated performance car. These 3D domed wheel center cap emblems bring that same sport-styled precision to your caps. A full-color reproduction of the Kia GT Line emblem is printed on premium vinyl using fade-resistant inks rated for years of sunlight. The dome is crystal-clear polyurethane resin cured to a hard, transparent finish — no bubbles, no imperfections. That cured dome resists scratches, blocks water, deflects UV radiation, and handles thermal cycling from winter frost to summer highway heat. The adhesive is an industrial-grade acrylic pressure-sensitive film rated for permanent outdoor bonding. Peel the liner, set the emblem, press for thirty seconds, and the job is complete. Full bond strength develops within twenty-four hours and holds through every condition the car encounters. Sizes run from 20 mm to 120 mm, covering every Kia GT Line wheel cap from an EV6 GT Line to the latest models in the range. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

KIA GT Line Emblem Center Hup Cap Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Kia's GT Line philosophy draws directly from the design language established by the Stinger — the rear-wheel-drive gran turismo that proved Kia could build a car to challenge BMW and Audi on driving dynamics and visual presence. The tiger-nose grille, sculpted bodywork, and athletic proportions that defined the Stinger have been distilled into the GT Line aesthetic applied across the range, ensuring that even a compact hatchback or a family crossover carries a visual connection to Kia's most celebrated performance car. These 3D domed wheel center cap emblems bring that same sport-styled precision to your caps. A full-color reproduction of the Kia GT Line emblem is printed on premium vinyl using fade-resistant inks rated for years of sunlight. The dome is crystal-clear polyurethane resin cured to a hard, transparent finish — no bubbles, no imperfections. That cured dome resists scratches, blocks water, deflects UV radiation, and handles thermal cycling from winter frost to summer highway heat. The adhesive is an industrial-grade acrylic pressure-sensitive film rated for permanent outdoor bonding. Peel the liner, set the emblem, press for thirty seconds, and the job is complete. Full bond strength develops within twenty-four hours and holds through every condition the car encounters. Sizes run from 20 mm to 120 mm, covering every Kia GT Line wheel cap from an EV6 GT Line to the latest models in the range. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.