Impossible Stickers
0
0
Prev Product
Next Product
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design
Mazda Speed Emblem Wheel Center Caps Stylish Design

Mazda Speed Emblem Wheel Center Caps Stylish Design

(0 Reviews)
€3.30
Availability:In Stock
SKU:6512

Mazda Speed Emblem Wheel Center Caps Stylish Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Mazda Speed MX-5 Miata — produced in limited numbers from 2004 to 2005 — was a factory-turbocharged version of the NB-generation Miata that added a purpose-built IHI turbocharger system, intercooler, upgraded fuel system, and a six-speed manual transmission to create a 178-horsepower roadster with significantly more straight-line performance than the standard naturally aspirated model while preserving the MX-5's legendary lightweight handling balance. The Mazda Speed MX-5 featured unique exterior styling including a front air dam, side skirts, rear spoiler, and a distinctive two-tone paint scheme, plus Bilstein dampers, larger brakes, and a Torsen limited-slip differential that enhanced the car's track capability. Only approximately 5,428 Mazda Speed MX-5s were produced, making it one of the rarest and most collectible modern Miata variants worldwide. These 3D domed wheel center cap emblems honor that rare factory-turbo Mazda Speed MX-5. Each emblem features the Mazda Speed badge reproduced on premium automotive vinyl at 1,440 dpi with solvent-based inks for lasting accuracy. A thick dome of UV-stabilized polyurethane resin covers the print, forming a crystal-clear, scratch-resistant, waterproof surface. The adhesive is a pre-applied industrial acrylic film. Clean the cap, peel, position the emblem, and press for thirty seconds. The bond is permanent — no tools, no clips, no drilling. Sizes from 20 mm to 120 mm. Custom diameters upon request. Each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Mazda Speed Emblem Wheel Center Caps Stylish Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Mazda Speed MX-5 Miata — produced in limited numbers from 2004 to 2005 — was a factory-turbocharged version of the NB-generation Miata that added a purpose-built IHI turbocharger system, intercooler, upgraded fuel system, and a six-speed manual transmission to create a 178-horsepower roadster with significantly more straight-line performance than the standard naturally aspirated model while preserving the MX-5's legendary lightweight handling balance. The Mazda Speed MX-5 featured unique exterior styling including a front air dam, side skirts, rear spoiler, and a distinctive two-tone paint scheme, plus Bilstein dampers, larger brakes, and a Torsen limited-slip differential that enhanced the car's track capability. Only approximately 5,428 Mazda Speed MX-5s were produced, making it one of the rarest and most collectible modern Miata variants worldwide. These 3D domed wheel center cap emblems honor that rare factory-turbo Mazda Speed MX-5. Each emblem features the Mazda Speed badge reproduced on premium automotive vinyl at 1,440 dpi with solvent-based inks for lasting accuracy. A thick dome of UV-stabilized polyurethane resin covers the print, forming a crystal-clear, scratch-resistant, waterproof surface. The adhesive is a pre-applied industrial acrylic film. Clean the cap, peel, position the emblem, and press for thirty seconds. The bond is permanent — no tools, no clips, no drilling. Sizes from 20 mm to 120 mm. Custom diameters upon request. Each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.