Impossible Stickers
0
0
Prev Product
Next Product
McLaren Logo Silicone Emblem Sleek Style
McLaren Logo Silicone Emblem Sleek Style
McLaren Logo Silicone Emblem Sleek Style
McLaren Logo Silicone Emblem Sleek Style

McLaren Logo Silicone Emblem Sleek Style

3.30
Availability:In Stock
SKU:7714

McLaren Logo Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The McLaren Elva — an open-cockpit, roofless roadster limited to 149 examples — pushed McLaren's lightweight philosophy to its most radical conclusion by eliminating not just the roof but also the windscreen, using an Active Air Management System to deflect airflow over the cabin at speed. The Elva demonstrated that McLaren's engineers were willing to rethink even the most fundamental assumptions about what a road car needs in pursuit of the purest possible driving experience. These 3D domed wheel center cap emblems honor that racing heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every McLaren wheel cap from a GT to the latest Ultimate Series. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

McLaren Logo Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The McLaren Elva — an open-cockpit, roofless roadster limited to 149 examples — pushed McLaren's lightweight philosophy to its most radical conclusion by eliminating not just the roof but also the windscreen, using an Active Air Management System to deflect airflow over the cabin at speed. The Elva demonstrated that McLaren's engineers were willing to rethink even the most fundamental assumptions about what a road car needs in pursuit of the purest possible driving experience. These 3D domed wheel center cap emblems honor that racing heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every McLaren wheel cap from a GT to the latest Ultimate Series. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.