Impossible Stickers
0
0
Prev Product
Next Product
Mitsubishi Logo Silicone Emblem Sleek Style
Mitsubishi Logo Silicone Emblem Sleek Style
Mitsubishi Logo Silicone Emblem Sleek Style
Mitsubishi Logo Silicone Emblem Sleek Style

Mitsubishi Logo Silicone Emblem Sleek Style

3.30
Availability:In Stock
SKU:7966

Mitsubishi Logo Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Mitsubishi 3000GT — sold as the GTO in Japan — was the company's flagship sports car of the 1990s, a twin-turbocharged, all-wheel-drive, all-wheel-steering grand tourer that packed every piece of technology Mitsubishi could engineer into a single vehicle. Active aerodynamics, electronically controlled suspension, and 320 horsepower made the 3000GT a technological showcase that rivaled the Nissan GT-R and Toyota Supra of its era. These 3D domed wheel center cap emblems honor that heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Pajero to a weekend rally build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Mitsubishi Logo Silicone Emblem Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Mitsubishi 3000GT — sold as the GTO in Japan — was the company's flagship sports car of the 1990s, a twin-turbocharged, all-wheel-drive, all-wheel-steering grand tourer that packed every piece of technology Mitsubishi could engineer into a single vehicle. Active aerodynamics, electronically controlled suspension, and 320 horsepower made the 3000GT a technological showcase that rivaled the Nissan GT-R and Toyota Supra of its era. These 3D domed wheel center cap emblems honor that heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Pajero to a weekend rally build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.