Impossible Stickers
0
0
Prev Product
Next Product
MOMO Silicone Sticker Elite Finish
MOMO Silicone Sticker Elite Finish
MOMO Silicone Sticker Elite Finish
MOMO Silicone Sticker Elite Finish

MOMO Silicone Sticker Elite Finish

3.30
Availability:In Stock
SKU:8030

MOMO Silicone Sticker Elite Finish

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Momo arrow logo — a blue-and-yellow emblem featuring a stylized arrow — has been a fixture in motorsport cockpits for over six decades. It first appeared on the steering wheel that John Surtees gripped when he won the 1964 Formula One World Championship driving a Ferrari, and it has been held by every generation of champions since. That logo on a center cap carries a direct lineage from the Formula One grid to the road. These 3D domed wheel center cap emblems honor that Italian racing heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every Momo wheel cap from a set of Momo Hyperstar EVOs to the latest RF Series forged designs. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

MOMO Silicone Sticker Elite Finish

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Momo arrow logo — a blue-and-yellow emblem featuring a stylized arrow — has been a fixture in motorsport cockpits for over six decades. It first appeared on the steering wheel that John Surtees gripped when he won the 1964 Formula One World Championship driving a Ferrari, and it has been held by every generation of champions since. That logo on a center cap carries a direct lineage from the Formula One grid to the road. These 3D domed wheel center cap emblems honor that Italian racing heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Sizes run from 20 mm to 120 mm, covering every Momo wheel cap from a set of Momo Hyperstar EVOs to the latest RF Series forged designs. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.