Impossible Stickers
0
0
Prev Product
Next Product
Nismo Badge Emblems Center Cap Superior Craft
Nismo Badge Emblems Center Cap Superior Craft
Nismo Badge Emblems Center Cap Superior Craft
Nismo Badge Emblems Center Cap Superior Craft

Nismo Badge Emblems Center Cap Superior Craft

3.30
Availability:In Stock
SKU:8261

Nismo Badge Emblems Center Cap Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • From the Group C Nissan R90CK that competed at Le Mans to the GT-R LM Nismo that returned to the Sarthe in 2015 with a radical front-engined, front-wheel-drive layout, Nismo has never been afraid to challenge engineering convention. That willingness to experiment — to build a front-drive Le Mans prototype when every competitor used mid-engine layouts — defines a division that treats racing as an engineering laboratory. These 3D domed wheel center cap emblems honor that racing pedigree with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Juke Nismo to a full track build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Nismo Badge Emblems Center Cap Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • From the Group C Nissan R90CK that competed at Le Mans to the GT-R LM Nismo that returned to the Sarthe in 2015 with a radical front-engined, front-wheel-drive layout, Nismo has never been afraid to challenge engineering convention. That willingness to experiment — to build a front-drive Le Mans prototype when every competitor used mid-engine layouts — defines a division that treats racing as an engineering laboratory. These 3D domed wheel center cap emblems honor that racing pedigree with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Juke Nismo to a full track build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.