Impossible Stickers
0
0
Prev Product
Next Product
Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality
Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality
Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality
Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality

Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality

3.30
Availability:In Stock
SKU:8301

Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • From the Group C Nissan R90CK that competed at Le Mans to the GT-R LM Nismo that returned to the Sarthe in 2015 with a radical front-engined, front-wheel-drive layout, Nismo has never been afraid to challenge engineering convention. That willingness to experiment — to build a front-drive Le Mans prototype when every competitor used mid-engine layouts — defines a division that treats racing as an engineering laboratory. These 3D domed wheel center cap emblems honor that racing pedigree with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Juke Nismo to a full track build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Nismo Emblem Center Hub Cap Self-Adhesive Prime Quality

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • From the Group C Nissan R90CK that competed at Le Mans to the GT-R LM Nismo that returned to the Sarthe in 2015 with a radical front-engined, front-wheel-drive layout, Nismo has never been afraid to challenge engineering convention. That willingness to experiment — to build a front-drive Le Mans prototype when every competitor used mid-engine layouts — defines a division that treats racing as an engineering laboratory. These 3D domed wheel center cap emblems honor that racing pedigree with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Standard sizes span 20 mm to 120 mm, accommodating everything from a Juke Nismo to a full track build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.