Impossible Stickers
0
0
Prev Product
Next Product
Nissan Logo Silicone Sticker Self-Adhesive Elite Finish
Nissan Logo Silicone Sticker Self-Adhesive Elite Finish
Nissan Logo Silicone Sticker Self-Adhesive Elite Finish
Nissan Logo Silicone Sticker Self-Adhesive Elite Finish

Nissan Logo Silicone Sticker Self-Adhesive Elite Finish

3.30
Availability:In Stock
SKU:8433

Nissan Logo Silicone Sticker Self-Adhesive Elite Finish

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Nissan Silvia — spanning generations from the S13 through the S15 — became the definitive drift car, a lightweight, rear-wheel-drive coupé with a turbocharged four-cylinder engine and a chassis that rewarded oversteer with a precision that made it the weapon of choice for D1 Grand Prix competitors and grassroots drifters worldwide. The Silvia is the car that built the global drifting movement. These 3D domed wheel center cap emblems carry the Nissan badge with the pride it deserves. The construction starts with a high-resolution digital print of the logo on automotive-grade vinyl, reproducing the emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Whether you drive a Patrol or a classic 510 Bluebird, these emblems fit any cap recess from 20 mm to 120 mm in diameter. Custom sizes are available on request, and each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Nissan Logo Silicone Sticker Self-Adhesive Elite Finish

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Nissan Silvia — spanning generations from the S13 through the S15 — became the definitive drift car, a lightweight, rear-wheel-drive coupé with a turbocharged four-cylinder engine and a chassis that rewarded oversteer with a precision that made it the weapon of choice for D1 Grand Prix competitors and grassroots drifters worldwide. The Silvia is the car that built the global drifting movement. These 3D domed wheel center cap emblems carry the Nissan badge with the pride it deserves. The construction starts with a high-resolution digital print of the logo on automotive-grade vinyl, reproducing the emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Whether you drive a Patrol or a classic 510 Bluebird, these emblems fit any cap recess from 20 mm to 120 mm in diameter. Custom sizes are available on request, and each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.