Impossible Stickers
0
0
Prev Product
Next Product
Peugeot Logo Silicone Badge Prestige Line
Peugeot Logo Silicone Badge Prestige Line
Peugeot Logo Silicone Badge Prestige Line
Peugeot Logo Silicone Badge Prestige Line

Peugeot Logo Silicone Badge Prestige Line

3.30
Availability:In Stock
SKU:8839

Peugeot Logo Silicone Badge Prestige Line

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Peugeot's Dakar dominance was renewed in the 2010s with the 2008 DKR and 3008 DKR — radical, rear-wheel-drive buggies that won consecutive Dakar Rallies from 2016 to 2018 with Stéphane Peterhansel and Carlos Sainz Sr. at the wheel. The buggy concept prioritized suspension travel and simplicity over the four-wheel-drive convention, and its success rewrote the rulebook for cross-country rally-raid engineering. These 3D domed wheel center cap emblems carry the Peugeot lion with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Whether you drive a 208 or a classic 205 GTI, these emblems fit any cap recess from 20 mm to 120 mm in diameter. Custom sizes are available on request, and each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Peugeot Logo Silicone Badge Prestige Line

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Peugeot's Dakar dominance was renewed in the 2010s with the 2008 DKR and 3008 DKR — radical, rear-wheel-drive buggies that won consecutive Dakar Rallies from 2016 to 2018 with Stéphane Peterhansel and Carlos Sainz Sr. at the wheel. The buggy concept prioritized suspension travel and simplicity over the four-wheel-drive convention, and its success rewrote the rulebook for cross-country rally-raid engineering. These 3D domed wheel center cap emblems carry the Peugeot lion with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic emblem with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Whether you drive a 208 or a classic 205 GTI, these emblems fit any cap recess from 20 mm to 120 mm in diameter. Custom sizes are available on request, and each order includes one emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.