Impossible Stickers
0
0
Prev Product
Next Product
Peugeot Logo Silicone Sticker Superior Craft
Peugeot Logo Silicone Sticker Superior Craft
Peugeot Logo Silicone Sticker Superior Craft
Peugeot Logo Silicone Sticker Superior Craft

Peugeot Logo Silicone Sticker Superior Craft

3.30
Availability:In Stock
SKU:8756

Peugeot Logo Silicone Sticker Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Peugeot set an all-time record at the Pikes Peak International Hill Climb in 2013 when Sébastien Loeb drove the 208 T16 Pikes Peak up the 12.42-mile Colorado mountain course in 8 minutes and 13 seconds — a time that demolished the previous record by over a minute. The 875-horsepower, twin-turbocharged prototype reached altitudes where naturally aspirated engines could barely breathe, showcasing turbo technology that traced its lineage directly to the 205 T16. These 3D domed wheel center cap emblems honor that heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant — from vintage 504 hub caps to the caps on a 308. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Peugeot Logo Silicone Sticker Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Peugeot set an all-time record at the Pikes Peak International Hill Climb in 2013 when Sébastien Loeb drove the 208 T16 Pikes Peak up the 12.42-mile Colorado mountain course in 8 minutes and 13 seconds — a time that demolished the previous record by over a minute. The 875-horsepower, twin-turbocharged prototype reached altitudes where naturally aspirated engines could barely breathe, showcasing turbo technology that traced its lineage directly to the 205 T16. These 3D domed wheel center cap emblems honor that heritage with meticulous build quality. Each emblem begins as a precision-cut vinyl disc printed at 1,440 dpi with solvent-based inks chosen for outdoor durability. A generous pour of UV-stabilized polyurethane resin is then applied, self-leveling into a flawless dome that adds visual depth and a glass-like three-dimensional effect. Once cured, the resin shrugs off gravel spray, resists brake-dust corrosion, and refuses to yellow even on vehicles parked outdoors year-round. On the back sits a factory-applied layer of industrial acrylic adhesive protected by a peel-away liner. Clean the cap with isopropyl alcohol, remove the liner, position the emblem, and press firmly for half a minute. The bond is permanent on metal, plastic, and painted surfaces — no heat gun, no primer, no tools required. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant — from vintage 504 hub caps to the caps on a 308. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.