Impossible Stickers
0
0
Prev Product
Next Product
Pontiac Domed Emblem Self-Adhesive Sleek Style
Pontiac Domed Emblem Self-Adhesive Sleek Style
Pontiac Domed Emblem Self-Adhesive Sleek Style
Pontiac Domed Emblem Self-Adhesive Sleek Style

Pontiac Domed Emblem Self-Adhesive Sleek Style

3.30
Availability:In Stock
SKU:8918

Pontiac Domed Emblem Self-Adhesive Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The 1964 Pontiac GTO is widely credited as the car that launched the American muscle-car era. Chief Engineer John DeLorean and his team circumvented GM's ban on big engines in mid-size cars by offering the 389-cubic-inch V8 as an option package on the Tempest, creating a formula — big engine, small car, affordable price — that every manufacturer rushed to copy. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Pontiac wheel cap from a Firebird Formula to the rarest muscle-car rally wheels. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Pontiac Domed Emblem Self-Adhesive Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The 1964 Pontiac GTO is widely credited as the car that launched the American muscle-car era. Chief Engineer John DeLorean and his team circumvented GM's ban on big engines in mid-size cars by offering the 389-cubic-inch V8 as an option package on the Tempest, creating a formula — big engine, small car, affordable price — that every manufacturer rushed to copy. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Pontiac wheel cap from a Firebird Formula to the rarest muscle-car rally wheels. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.