Impossible Stickers
0
0
Prev Product
Next Product
Pontiac Domed Emblem Superior Craft
Pontiac Domed Emblem Superior Craft
Pontiac Domed Emblem Superior Craft
Pontiac Domed Emblem Superior Craft

Pontiac Domed Emblem Superior Craft

3.30
Availability:In Stock
SKU:8990

Pontiac Domed Emblem Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Ram Air engines — offered on the GTO, Firebird, and Trans Am from the late 1960s — used functional hood scoops to ram cool, dense air into the carburetor at speed, boosting horsepower beyond what the factory ratings admitted. Ram Air III and Ram Air IV GTOs are among the most valuable muscle cars in the collector market, and their underrated dyno numbers are part of the legend. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from a Firebird Formula to a concours-ready restoration. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Pontiac Domed Emblem Superior Craft

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Ram Air engines — offered on the GTO, Firebird, and Trans Am from the late 1960s — used functional hood scoops to ram cool, dense air into the carburetor at speed, boosting horsepower beyond what the factory ratings admitted. Ram Air III and Ram Air IV GTOs are among the most valuable muscle cars in the collector market, and their underrated dyno numbers are part of the legend. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from a Firebird Formula to a concours-ready restoration. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.