Impossible Stickers
0
0
Prev Product
Next Product
RAYS Epoxy Sticker Sleek Style
RAYS Epoxy Sticker Sleek Style
RAYS Epoxy Sticker Sleek Style
RAYS Epoxy Sticker Sleek Style

RAYS Epoxy Sticker Sleek Style

3.30
Availability:In Stock
SKU:9025

RAYS Epoxy Sticker Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Volk Racing TE37 Saga is the latest evolution of the wheel that started it all — retaining the iconic six-spoke silhouette while incorporating revised spoke geometry, updated finish options, and weight reductions made possible by advances in forging tooling. The Saga proves that a design launched in 1996 can remain relevant three decades later when the engineering underneath keeps evolving. These 3D domed wheel center cap emblems carry that racing DNA in every detail. The construction starts with a high-resolution digital print of the Rays badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from a set of TE37 Ultras to a time-attack build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

RAYS Epoxy Sticker Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Volk Racing TE37 Saga is the latest evolution of the wheel that started it all — retaining the iconic six-spoke silhouette while incorporating revised spoke geometry, updated finish options, and weight reductions made possible by advances in forging tooling. The Saga proves that a design launched in 1996 can remain relevant three decades later when the engineering underneath keeps evolving. These 3D domed wheel center cap emblems carry that racing DNA in every detail. The construction starts with a high-resolution digital print of the Rays badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from a set of TE37 Ultras to a time-attack build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.