Impossible Stickers
0
0
Prev Product
Next Product
RAYS Logo Silicone Sticker Self-Adhesive Prime Quality
RAYS Logo Silicone Sticker Self-Adhesive Prime Quality
RAYS Logo Silicone Sticker Self-Adhesive Prime Quality
RAYS Logo Silicone Sticker Self-Adhesive Prime Quality

RAYS Logo Silicone Sticker Self-Adhesive Prime Quality

3.30
Availability:In Stock
SKU:9133

RAYS Logo Silicone Sticker Self-Adhesive Prime Quality

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Volk Racing TE37 — launched in 1996 — is arguably the most iconic aftermarket wheel in automotive history. The name says it all: 'TE' for Touring Evolution, '37' because the original 15x6.0-inch wheel weighed just 3.7 kilograms. That six-spoke forged monoblock set the benchmark for lightweight performance wheels and spawned an entire lineage — SL, Ultra, Saga — that continues to define the category. These 3D domed wheel center cap emblems carry that racing DNA in every detail. The construction starts with a high-resolution digital print of the Rays badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Rays center cap from a set of G025s to the latest catalog additions. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

RAYS Logo Silicone Sticker Self-Adhesive Prime Quality

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Volk Racing TE37 — launched in 1996 — is arguably the most iconic aftermarket wheel in automotive history. The name says it all: 'TE' for Touring Evolution, '37' because the original 15x6.0-inch wheel weighed just 3.7 kilograms. That six-spoke forged monoblock set the benchmark for lightweight performance wheels and spawned an entire lineage — SL, Ultra, Saga — that continues to define the category. These 3D domed wheel center cap emblems carry that racing DNA in every detail. The construction starts with a high-resolution digital print of the Rays badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Rays center cap from a set of G025s to the latest catalog additions. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.