Impossible Stickers
0
0
Prev Product
Next Product
Ronal Logo Silicone Sticker Self-Adhesive Refined Design
Ronal Logo Silicone Sticker Self-Adhesive Refined Design
Ronal Logo Silicone Sticker Self-Adhesive Refined Design
Ronal Logo Silicone Sticker Self-Adhesive Refined Design

Ronal Logo Silicone Sticker Self-Adhesive Refined Design

3.30
Availability:In Stock
SKU:9275

Ronal Logo Silicone Sticker Self-Adhesive Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Audi Quattro — the car that redefined rally racing in the early 1980s — wore Ronal R10 Turbo wheels both on the competition stages and in dealer showrooms, fusing the wheel's identity with one of the most important cars in motorsport history. If you owned a Quattro, you ran Ronals — and that association cemented the brand's reputation among performance enthusiasts for a generation. These 3D domed wheel center cap emblems carry that Ronal heritage in every detail. The construction starts with a high-resolution digital print of the Ronal badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant across the Ronal range — from a set of R55s to OEM-fitted originals. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Ronal Logo Silicone Sticker Self-Adhesive Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Audi Quattro — the car that redefined rally racing in the early 1980s — wore Ronal R10 Turbo wheels both on the competition stages and in dealer showrooms, fusing the wheel's identity with one of the most important cars in motorsport history. If you owned a Quattro, you ran Ronals — and that association cemented the brand's reputation among performance enthusiasts for a generation. These 3D domed wheel center cap emblems carry that Ronal heritage in every detail. The construction starts with a high-resolution digital print of the Ronal badge on automotive-grade vinyl, reproducing the logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant across the Ronal range — from a set of R55s to OEM-fitted originals. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.