Impossible Stickers
0
0
Prev Product
Next Product
Sparco Emblem Epoxy Self-Adhesive Elite Edition
Sparco Emblem Epoxy Self-Adhesive Elite Edition
Sparco Emblem Epoxy Self-Adhesive Elite Edition
Sparco Emblem Epoxy Self-Adhesive Elite Edition

Sparco Emblem Epoxy Self-Adhesive Elite Edition

3.30
Availability:In Stock
SKU:9844

Sparco Emblem Epoxy Self-Adhesive Elite Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Sparco's steering wheels — from flat-bottomed suede competition wheels to street-legal sport designs — are gripped by drivers at every level of racing, from karting to Formula 1. The ergonomic research and material science that goes into a steering wheel designed for a cockpit where fractions of a second matter is the same research that informs every Sparco product, including the alloy wheels. These 3D domed wheel center cap emblems carry that motorsport DNA in every detail. The construction starts with a high-resolution digital print of the Sparco badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Sparco center cap from a set of DRS wheels to the latest catalog additions. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Sparco Emblem Epoxy Self-Adhesive Elite Edition

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Sparco's steering wheels — from flat-bottomed suede competition wheels to street-legal sport designs — are gripped by drivers at every level of racing, from karting to Formula 1. The ergonomic research and material science that goes into a steering wheel designed for a cockpit where fractions of a second matter is the same research that informs every Sparco product, including the alloy wheels. These 3D domed wheel center cap emblems carry that motorsport DNA in every detail. The construction starts with a high-resolution digital print of the Sparco badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Sparco center cap from a set of DRS wheels to the latest catalog additions. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.