Impossible Stickers
0
0
Prev Product
Next Product
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design
Subaru Domed Sticker Self-Adhesive Refined Design

Subaru Domed Sticker Self-Adhesive Refined Design

(0 Reviews)
€3.30
Availability:In Stock
SKU:10084

Subaru Domed Sticker Self-Adhesive Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Subaru Outback pioneered the crossover concept before the word existed — taking a Legacy wagon, raising the ride height, adding body cladding, and fitting all-wheel drive to create a vehicle that could handle light trails, ski-resort roads, and suburban school runs with equal composure. It remains one of the best-selling Subarus worldwide. These 3D domed wheel center cap emblems carry the Pleiades stars with the pride they deserve. The construction starts with a high-resolution digital print of the Subaru six-star badge on automotive-grade vinyl, reproducing the constellation with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from an Impreza WRX STI to a weekend rally build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Subaru Domed Sticker Self-Adhesive Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Subaru Outback pioneered the crossover concept before the word existed — taking a Legacy wagon, raising the ride height, adding body cladding, and fitting all-wheel drive to create a vehicle that could handle light trails, ski-resort roads, and suburban school runs with equal composure. It remains one of the best-selling Subarus worldwide. These 3D domed wheel center cap emblems carry the Pleiades stars with the pride they deserve. The construction starts with a high-resolution digital print of the Subaru six-star badge on automotive-grade vinyl, reproducing the constellation with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Standard sizes span 20 mm to 120 mm, accommodating everything from an Impreza WRX STI to a weekend rally build. Custom measurements are available for any cap outside the standard range. Price is per single emblem.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.