Impossible Stickers
0
0
Prev Product
Next Product
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style
Volvo R Design Domed Emblem Self-Adhesive Sleek Style

Volvo R Design Domed Emblem Self-Adhesive Sleek Style

(0 Reviews)
€3.30
Availability:In Stock
SKU:10900

Volvo R Design Domed Emblem Self-Adhesive Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Volvo S60 R and V70 R, produced from 2003 to 2007, were the most mechanically ambitious performance Volvos ever built — turbocharged inline-five engines, Haldex all-wheel drive, and the 4C continuously controlled chassis that could switch between Comfort, Sport, and Advanced modes. The R-Design trim inherited that philosophy in a package designed for the full Volvo range. These 3D domed wheel center cap emblems carry that R-Design spirit in every detail. The construction starts with a high-resolution digital print of the Volvo R Design badge on automotive-grade vinyl, reproducing the mark with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Volvo wheel cap from an XC60 R-Design to the latest plug-in hybrid models. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Volvo R Design Domed Emblem Self-Adhesive Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant

    • The Volvo S60 R and V70 R, produced from 2003 to 2007, were the most mechanically ambitious performance Volvos ever built — turbocharged inline-five engines, Haldex all-wheel drive, and the 4C continuously controlled chassis that could switch between Comfort, Sport, and Advanced modes. The R-Design trim inherited that philosophy in a package designed for the full Volvo range. These 3D domed wheel center cap emblems carry that R-Design spirit in every detail. The construction starts with a high-resolution digital print of the Volvo R Design badge on automotive-grade vinyl, reproducing the mark with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Volvo wheel cap from an XC60 R-Design to the latest plug-in hybrid models. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds

    • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.