Impossible Stickers
0
0
Prev Product
Next Product
Volvo R Design Logo Silicone Badge Sleek Style
Volvo R Design Logo Silicone Badge Sleek Style
Volvo R Design Logo Silicone Badge Sleek Style
Volvo R Design Logo Silicone Badge Sleek Style

Volvo R Design Logo Silicone Badge Sleek Style

3.30
Availability:In Stock
SKU:10896

Volvo R Design Logo Silicone Badge Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The R-Design S60 sedan puts Volvo in direct competition with the BMW 3 Series Sport Line and the Audi A4 S Line — and it does so with chassis tuning that is genuinely sporty rather than just cosmetically different from the base model. Stiffer anti-roll bars, revised spring rates, and sport-calibrated steering give it a sharpness that surprises drivers who expect Nordic comfort above all else. These 3D domed wheel center cap emblems carry that R-Design spirit in every detail. The construction starts with a high-resolution digital print of the Volvo R Design badge on automotive-grade vinyl, reproducing the mark with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant — from vintage 850 R hubs to the caps on an XC40 R-Design. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Volvo R Design Logo Silicone Badge Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The R-Design S60 sedan puts Volvo in direct competition with the BMW 3 Series Sport Line and the Audi A4 S Line — and it does so with chassis tuning that is genuinely sporty rather than just cosmetically different from the base model. Stiffer anti-roll bars, revised spring rates, and sport-calibrated steering give it a sharpness that surprises drivers who expect Nordic comfort above all else. These 3D domed wheel center cap emblems carry that R-Design spirit in every detail. The construction starts with a high-resolution digital print of the Volvo R Design badge on automotive-grade vinyl, reproducing the mark with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every cap variant — from vintage 850 R hubs to the caps on an XC40 R-Design. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.