Impossible Stickers
0
0
Prev Product
Next Product
XXR Logo Silicone Badge Sleek Style
XXR Logo Silicone Badge Sleek Style
XXR Logo Silicone Badge Sleek Style
XXR Logo Silicone Badge Sleek Style

XXR Logo Silicone Badge Sleek Style

3.30
Availability:In Stock
SKU:11078

XXR Logo Silicone Badge Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Dual-drilled bolt patterns are a signature feature across the XXR range. A single wheel might carry both 4x100 and 4x114.3 or both 5x100 and 5x114.3 drilling, which means a single SKU can serve Honda Civics, Nissan Silvias, Subaru BRZs, and Toyota 86s — a practical advantage that simplifies inventory for shops and fitment decisions for buyers. These 3D domed center cap emblems give your XXR wheels a finished, factory-quality look. The construction starts with a high-resolution digital print of the XXR logo on automotive-grade vinyl, reproducing the brand mark with pin-sharp accuracy and true color fidelity. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every center cap variant across the XXR range — from a set of flow-formed XXRs to their flow-formed performance line. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

XXR Logo Silicone Badge Sleek Style

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • Dual-drilled bolt patterns are a signature feature across the XXR range. A single wheel might carry both 4x100 and 4x114.3 or both 5x100 and 5x114.3 drilling, which means a single SKU can serve Honda Civics, Nissan Silvias, Subaru BRZs, and Toyota 86s — a practical advantage that simplifies inventory for shops and fitment decisions for buyers. These 3D domed center cap emblems give your XXR wheels a finished, factory-quality look. The construction starts with a high-resolution digital print of the XXR logo on automotive-grade vinyl, reproducing the brand mark with pin-sharp accuracy and true color fidelity. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Available in diameters from 20 mm through 120 mm, these emblems cover every center cap variant across the XXR range — from a set of flow-formed XXRs to their flow-formed performance line. Non-standard sizes can be ordered.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.