Impossible Stickers
0
0
Prev Product
Next Product
Pontiac Epoxy Sticker Refined Design
Pontiac Epoxy Sticker Refined Design
Pontiac Epoxy Sticker Refined Design
Pontiac Epoxy Sticker Refined Design

Pontiac Epoxy Sticker Refined Design

3.30
Availability:In Stock
SKU:8958

Pontiac Epoxy Sticker Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Pontiac Solstice, launched in 2006, was a two-seat roadster that proved Pontiac could still design a car that made people turn their heads. Its muscular proportions, rear-wheel-drive layout, and available turbocharged engine made it one of the most exciting cars Pontiac had built in decades — and its short production life, cut short by GM's bankruptcy, has made it a future collectible. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Pontiac wheel cap from a Catalina to the rarest muscle-car rally wheels. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.

Priority Shipping

30-Day Returns

Secure Payment

Pontiac Epoxy Sticker Refined Design

  • Materials Premium vinyl base topped with a 3D domed resin coating
  • Diameter 20–120 mm (contact us for custom sizes)
  • Durability Features Scratch-resistant, waterproof, tear-resistant, and UV-resistant
  • The Pontiac Solstice, launched in 2006, was a two-seat roadster that proved Pontiac could still design a car that made people turn their heads. Its muscular proportions, rear-wheel-drive layout, and available turbocharged engine made it one of the most exciting cars Pontiac had built in decades — and its short production life, cut short by GM's bankruptcy, has made it a future collectible. These 3D domed wheel center cap emblems carry that Pontiac arrowhead with the pride it deserves. The construction starts with a high-resolution digital print of the badge on automotive-grade vinyl, reproducing the iconic logo with pin-sharp accuracy. Over the print sits a thick dome of optically clear polyurethane resin, poured under controlled conditions and cured to a smooth, bubble-free finish. That resin layer forms a physical shield against stone chips, brake dust, road salt, UV radiation, and the abrasive punishment of automatic car washes, keeping the logo crisp and vibrant season after season. The adhesive backing is a pressure-sensitive 3M-grade acrylic film. Peel the protective liner, center the emblem on a clean, dry cap surface, and press firmly for thirty seconds. The bond grabs on contact and reaches full strength within twenty-four hours — no drilling, no clips, no alignment tools. Sizes run from 20 mm to 120 mm, covering every Pontiac wheel cap from a Catalina to the rarest muscle-car rally wheels. Custom diameters are produced on request for any non-standard cap.

    How to Install (3 Easy Steps)

  • PREP Clean the area thoroughly
  • PEEL Remove the paper backing from the sticker
  • STICK Carefully position the sticker and press firmly for at least 30 seconds
  • Note: THESE STICKERS ARE INTENDED FOR FLAT SURFACES ONLY. THE PRICE IS FOR 1 EMBLEM.